Thermal Beacon’s Thermal Brake Light is a multispectral emitter operating in thermal wavebands, designed to provide military and special forces vehicles with a detectable signature for LWIR and MWIR camera systems. The device provides thermal brake illumination to support accident prevention during operations conducted in total darkness.
The Vehicle Brake Illuminator radiates a powerful infrared signal that can be detected by compatible thermal imaging systems. The device is incorporated into military and special forces vehicles as a backlight brake solution, enabling thermal imaging cameras to detect the vehicle’s infrared illumination signal during low-visibility operations. Several emitters can be cascaded to support different vehicle configurations.
The compact unit is designed to operate with an input voltage range of 12-24 VDC and provides a radiation divergence of 120° horizontally and vertically. The illuminator has a user selectable repetition rate of 0.5 to 2Hz and measures 70 x 52 x 55mm, with a weight of 300gr.
Detection performance depends on the thermal imaging system used. At 3–5 µm, the Thermal Brake Light provides a detection range of 5 km when used with an InSb detector and a 250 mm lens. When used with airborne optics, such as a fast-jet Litening pod operating within the same wavelength range, detection exceeds 15 km. At 8–12 µm, the device provides a detection range exceeding 1 km when used with a microbolometer camera with a narrow field of view, substantially exceeding armored vehicle convoy-spacing requirements.
The Vehicle Thermal Brake Light is designed to operate across a range of environmental temperatures, with an operating temperature range of −20°C to +55°C and a storage temperature range of −40°C to +71°C. Its compact dimensions, thermal emission capability and compatibility with thermal imaging systems allow it to support vehicle identification and brake illumination requirements during nighttime operations.
The Thermal Brake Light can be customized to suit the space allocated for a vehicle’s brake light and specific customer requirements. It can operate alongside or in place of the existing visible brake light using a simple integrated switch.




