SP-55 FI TS Generator Application
Designed with twin spark plugs, the SP-55 FI TS Generator Application is equipped with a fuel injection system.
With our ECU and the starter generator / controller SGC352 as well as the integrated cooling, this set up is load controlled and can supply electrical power up, see below:
- Controllable via CAN (optional generator start input)
- Battery voltage 36 – 75V (nominal 48V)
- Max. power 2 kW @ 48VDC (40A@MSL)
- Fuel consumption max 1.5 l/h
- Generator current sensor
- External load current sensor (via CAN)
- Temperature monitoring
- Overload derating
- Programmable battery charging current
- Standalone operation
- Automatic throttle regulation due to external load current sensor
- Advanced combustion engine start
| Dimensions | 31.6 × 26.1 × 25.2 cm |
| Type | 1-Cylinder Gas Engine |
| Capacity | 55 ccm / 3.35 cu in |
| Power | 2 KW pure electrical |
| Crankshaft | 4 ball bearings |
| Oil/Gasoline ratio | 1:50 / 2% mix |
| Bore diameter | 1.77 inch (45.00 mm) |
| Stroke | 1.37 inch (35.00 mm) |
