Detector UAV Payload
The Revector Detector IMSI Catcher Payload for UAVs is a low-SWaP (size, weight and power) module that is suitable for integration into a wide variety of drone platforms. Based on a dual-SDR (software-defined radio) design, it provides detection, tracking and control of 2G, 3G and 4G cellular devices, extracting and recording all IMSI, IMEI and TSMI data from targets in range.
The active payload module establishes a new mobile phone cell site, encouraging all GSM, UTMS and LTE devices in the area to connect. Once a target is connected, an accurate location is established and a range of functions can be executed on the device, including:
- Forcing 4G devices down to 2G/3G
- SMS sending & call making and spoofing
- Outbound call & SMS monitoring
- GPS location extraction
- Target battery draining
- Selective jamming (Denial of Service)
- Active route mapping
- Distance information
- Emergency call override
Specifications:
| Dimensions | 200 x 195 x 53 mm |
| Weight | 1.4 kg |
| Power | 12 VDC, <40W |
| RF Output Power | Up to 5W per channel |
| Receiver Sensitivity | < -120 dBm |
| SDR Frequencies | 400 MHz – 3 GHz |
| Operating Temperature Range | -15 to +55oC |
