Assured Position, Navigation and Timing (PNT) Solutions for Military and Defense
Single-antenna CPT7700 enclosure with GNSS+INS technology Compact enclosure with SPAN GNSS+INS technology delivers 3D position, velocity and attitude
Single-antenna CPT7700 enclosure with GNSS+INS technology

Compact enclosure with SPAN GNSS+INS technology delivers 3D position, velocity and attitude

The CPT7700 is an ultra-compact, light-weight, single-antenna enclosure with SPAN GNSS+INS technology delivering 3D positioning, velocity and attitude. Visit Website Send Message
Single-antenna CPT7700 enclosure with GNSS+INS technology

The CPT7700 is an ultra-compact enclosure containing an OEM7700 receiver from Hexagon | NovAtel and a high-performing Honeywell HG4930 Micro Electromechanical System (MEMS) Inertial Measurement Unit (IMU) to support leading-edge SPAN technology from NovAtel in an integrated, single enclosure solution. The absolute accuracy of Global Navigation Satellite System (GNSS) positioning and the stability of Inertial Measurement Unit (IMU) gyro and accelerometer measurements are deeply coupled to provide an exceptional 3D navigation solution with reliable velocity and attitude measurements. The internal OEM7700 receiver offers simultaneous tracking of multi-GNSS signals across all frequencies.

It provides tactical grade performance for unmanned vehicles, mobile mapping and other commercial and military guidance applications. The CPT7700 is a small, lightweight and low-power solution with multiple communication interfaces for easy integration on various platforms. The deep coupling of GNSS and INS measurements enhances satellite tracking and enables the most continuous positioning possible.

  • MEMS gyro and accelerometers
  • SPAN GNSS+INS capability with configurable application profiles
  • Advanced interference mitigation features
  • Dedicated wheel sensor input (DMI)
  • Purchasable upgrade for high IMU data rate (up to 400 Hz)
  • Internal data logging and transfer (16 GB)
  • Four receiver status LEDs
  • Event in and event out to support 1 PPS
  • Multiple communication interfaces
  • Commercially exportable system (non-ITAR)

System Type: Enclosed with IMU GNSS+INS enabled

General Info

Length (mm): 90
Width/Diametre (mm) 60
Height (mm): 60
Weight (g): 500
Typical Power Consumption (W): 9

Signal Tracking

GPS: L1C/A, L1C, L2C, L2P, L5
BeiDou: B1l, B1C, B2l, B2a, B2b, B3l
Galileo E1, E5 AltBOC, E5a, E5b, E6
SBAS: L1, L5, L6
QZSS: L1 C/A, L1C, L2C, L5
L-Band (primary RF only): Up to 5 channels

Number of Com Ports

RS-422 : 1
RS-232: 1
Ethernet: 1
RS-232 (230 400 bps max) 1
USB Device: 1
CAN Bus: 1
Event Input: 3
Event Output: 3
Wheel Sensor Input: 1


Accuracy (RMS)
Single Point L1: 1.5 m
Single Point L1/L2: 1.2 m
SBAS: 60 cm
DGPS: 40 cm
TerraStar-L: 40 cm
TerraStar-C PRO: 2.5 cm
TerraStar-X: 2.0 cm
RTK 1 cm + 1 ppm
IMU Raw Data Rate: 100 Hz or 400 Hz

Gyroscope Performance

Technology: MEMS
Input Rate (max) : ±325°/S

Accelerometer Performance

Technology: MEMS
Range: ±20 g

Keep up to date with the latest news and
technical developments in Unmanned Systems.

Sign up to the UST weekly eBrief

By clicking "Sign me up" I consent to my personal information being processed for the purpose of sending me the 'eBrief' weekly e-newsletter. See our Website privacy policy.