International Armoured Vehicles
Honeywell Aerospace | Better Cooling
SAE Media | Counter UAS
General Atomics Aeronautical Systems, Inc

GA-ASI Advances High-Strength Aluminum Alloy Qualification Through GOTHAAM Project

GA-ASI is leading the GOTHAAM project to qualify high-strength aluminum alloy for additive manufacturing, supporting scalable production and wider adoption across defense applications Feature Article by GA-ASI
GA-ASI Advances High-Strength Aluminum Alloy Qualification Through GOTHAAM Project
Follow DA

The qualification of high-strength aluminum alloys is an important consideration in expanding the use of additive manufacturing for defense applications. General Atomics Aeronautical Systems (GA-ASI) is addressing this through the Generation Of Technical-data for High-strength Aluminum Alloy Material (GOTHAAM) project, which focuses on qualifying a high-strength aluminum alloy using laser powder bed fusion (LPBF) systems.

Additive manufacturing, also known as 3D printing, is the process of producing an object from a digital 3D model by precisely adding successive layers of material.

General Atomics has long recognized the potential of advanced manufacturing technologies to support rapid production, complex geometries, materials engineered for extreme environments, reduced waste, affordability, and enhanced supply chain resilience. These capabilities are critical to next-generation platform development and defense sustainment.

The Department of War Manufacturing Technology Program (DoW ManTech) has also prioritized the acceleration of advanced manufacturing technologies and investment in manufacturing solutions to address emerging threats.

The Office of the Secretary of War Manufacturing Technology Program (OSW ManTech), which oversees the program, supports public-private partnerships to advance manufacturing technologies. America Makes, the DoW National Additive Manufacturing Innovation Institute, directly supports OSW ManTech’s strategic objective of maturing and deploying additive manufacturing technologies across the defense industrial base.

When America Makes issued its GOTHAAM project call, seeking proposals focused on qualifying a high-strength aluminum alloy using LPBF systems, GA-ASI responded with a proposal aligned with its existing additive manufacturing expertise.

LPBF is an additive manufacturing process in which a high-power beam melts and fuses successive layers of metal powder particles. The GOTHAAM project aims to establish a qualification framework that allows the defense industrial base to adopt the technology with greater confidence, while supporting a return on investment for manufacturers as LPBF aluminum alloy is introduced into defense equipment production.

The project aligns with General Atomics’ established additive manufacturing capabilities and its ongoing technology roadmap for next-generation uncrewed aerial systems (UAS).

General Atomics’ expertise in this additive manufacturing process has enabled it to rapidly deliver scalable, cost-effective uncrewed combat aircraft systems for the U.S. Air Force Collaborative Combat Aircraft program.

GA-ASI Awarded $5.5 Million GOTHAAM Project

America Makes and the National Center for Defense Manufacturing and Machining selected GA-ASI as the winner of the $5.5 million GOTHAAM project call.

David R. Alexander, President of GA-ASI, said, “GA-ASI welcomes these opportunities to collaborate with government and industry to advance critical capabilities. We appreciate the trust America Makes has in us to lead GOTHAAM and look forward to working with the great team of partners on the project.”

The project brings together aerospace vendors, digital engineering specialists, metal additive manufacturing and 3D printing technology providers, and upstream material producers. As project lead, GA-ASI is responsible for project execution and subcontract performance.

Qualifying High-Strength Aluminum Alloy for Defense Applications

GOTHAAM aims to develop material for a high-strength, 7075-equivalent aluminum alloy across three classes of LPBF machine systems: small, medium, and large-format printers.

The objective is to establish scalable production capabilities and verify that the resulting high-strength, 7075-equivalent aluminum alloy can support long-life, high-strength structural applications.

The 23-month project will be conducted in two phases:

Phase 0: Produce a process control document and preliminary qualification dataset establishing baseline feedstock, process, and material requirements to enable qualification.

Phase 1: Generate material compliant with the Metallic Materials Properties Development and Standardization handbook through testing across small, medium, and large multi-laser LPBF machines to confirm scalable performance and machine-to-machine equivalency for defense applications.

Validated material allowables datasets will be entered into the Department of War Workbench for Additive Materials, making metal additive manufacturing material property data accessible across the defense community.

Qualifying a corrosion-resistant, aerospace-grade alloy with broad defense and commercial applications is intended to provide the defense industrial base with qualified materials for low-risk production into critical defense platforms.

GA-ASI’s Additive Design and Manufacturing Center of Excellence

GA-ASI has invested in additive manufacturing technologies since the early 2000s and established its Additive Design and Manufacturing Center of Excellence in 2022.

Led by Technical Director Steve Fournier, the Additive Design and Manufacturing (AD&M) team comprises engineers and technicians with expertise in polymers, composites, materials, and metallic additive manufacturing technologies.

The company’s technology roadmap and qualification framework have supported the expansion of additive manufacturing across multiple GA-ASI aircraft systems.

GA-ASI’s guiding principle for applying additive manufacturing across the company is “Printing because we should and not because we can.”

Steve Fournier, Technical Director of AD&M at GA-ASI, “Working closely with our colleagues across all production stages, we continually look for ways to leverage additive manufacturing technologies into the design and operation of our aircraft and payload systems.”

The AD&M team evaluates GA-ASI system designs and manufacturing processes to identify where additive manufacturing methodologies can improve efficiency and flexibility. Internal collaboration is also a key driver of weight- and performance-optimized designs across GA-ASI systems.

Alongside its internal development activities, the team actively pursues opportunities to collaborate with aerospace peers, the additive manufacturing industry, and suppliers.

Through initiatives such as GOTHAAM, the team aims to help develop and mature additive manufacturing capabilities, accelerate the delivery of technologies for national security, and enhance manufacturing competitiveness.

Learn more on the GA-ASI website >>

To learn more, visit the General Atomics Aeronautical Systems, Inc Partner Hub: Innovation Partner Hub
Posted by Summer James Summer is an Editor & Copywriter at Defense Advancement. With a background in Creative Writing and English Literature, she joined in 2025 and brings a keen interest in drones and naval defense. Her focus is on producing clear, engaging content that explores the latest developments in military technology and defense innovation. Connect

More from General Atomics Aeronautical Systems, Inc

13 Dutch Companies Selected to Pitch at Blue Magic Netherlands 2026
13 Dutch Companies Selected to Pitch at Blue Magic Netherlands 2026

Blue Magic Ventures by General Atomics Aeronautical Systems has confirmed the 13 Dutch companies selected to pitch dual-use technologies addressing defense and security challenges at the Blue Magic Netherlands 2026 innovation and investment conference

Nov 06, 2026
GA-ASI Opens North Dakota Remote Flight Facility to Support AFRICOM
GA-ASI Opens North Dakota Remote Flight Facility to Support AFRICOM

General Atomics Aeronautical Systems cuts the ribbon on a new Grand Forks operations center, relocating drone pilots stateside to support defense missions, lower program costs, and enhance workforce safety

Nov 02, 2026
Uncrewed Airborne Early Warning Takes Flight with GA-ASI & Saab
Uncrewed Airborne Early Warning Takes Flight with GA-ASI & Saab

General Atomics Aeronautical Systems and Saab have completed groundbreaking flight trials integrating advanced radar on uncrewed aircraft, demonstrating simultaneous air and maritime target tracking to expand persistent surveillance without risking crew lives

Oct 30, 2026
GA-ASI & Spirit Defense Partner to Scale Autonomous Fighter Production
GA-ASI & Spirit Defense Partner to Scale Autonomous Fighter Production

General Atomics Aeronautical Systems and Spirit Defense have partnered to manufacture fuselages for the U.S. Air Force's modular FQ-42 Collaborative Combat Aircraft, significantly accelerating advanced uncrewed fighter production capacity and resilience

Oct 26, 2026
GA-ASI Flight Tests Advanced SNC ESM System on Gray Eagle UAS for Long-Range Sensing
GA-ASI Flight Tests Advanced SNC ESM System on Gray Eagle UAS for Long-Range Sensing

General Atomics Aeronautical Systems completes successful flight testing of SNC's electronic support measures system on the MQ-1C Gray Eagle ER, boosting U.S. Army long-range detection and survivability outside hostile threat zones

Oct 16, 2026
Arizona Army National Guard & GA-ASI Partner for First Gray Eagle 25M UAS Unit
Arizona Army National Guard & GA-ASI Partner for First Gray Eagle 25M UAS Unit

The Arizona Army National Guard will become the first unit to operate General Atomics Aeronautical Systems Gray Eagle 25M unmanned aircraft systems, with eight aircraft scheduled for delivery in September 2027

Oct 12, 2026

THE WEEKLY eBRIEF

The latest defense technology news, straight to your inbox.

Get our weekly roundup of technology developments, new products and industry news.

By subscribing, you agree to receive the weekly DA eBrief newsletter from EchoBlue Ltd. Unsubscribe at any time using the link in every email. See our Privacy Notice.

Advancing Defense Capability Through Strategic Collaboration Defense Advancement works with major OEMs to foster collaboration and increase engagement with SMEs, to accelerate innovation and drive defense capabilities forward.