The UIMU-H58 contains Honeywell's HG1700, a tactical grade IMU containing Ring Laser Gyros (RLG) and Servo accelerometers. The UIMU-HG handles the power requirements of the IMU from a 12-28 VDC power input and provides the IMU data to a SPAN® enabled GNSS/INS receiver such as the ProPak-V3™ or SPAN-SE™ using a custom NovAtel interface. IMU measurements are used by the GNSS/ INS receiver to compute a blended GNSS/INS position, velocity and attitude solution at up to 100 Hz. The HG1700 is International Traffic in Arms Regulations (ITAR) controlled and requires export approval for customers outside the United States.
Features- RLG and Servo accelerometers
- 100 Hz data rate
- Gyro performance of 1 degree/hour
- ITAR controlled
- Low noise and stable biases suited to ground and airborne survey
- Complete assembly or individual components available
- Economical with short delivery times
- Easy integration with NovAtel's GNSS/INS receivers
- Supported with industry's highest level of customer service
General Info
Length (mm): 195.00
Width/Diameter (mm): 168.00
Height (mm): 146.00
Weight (g): 4500.00
Typical Power Consumption (W): 8.00
IMU Data Rate: 100 Hz
Gyro Type: Ring Laser
IMU Info: ITAR Control
Performance
Gyro Bias In-run Stability (±deg/hr): 1
Gyro Bias Offset (deg/hr): 1
Gyro Angular Random Walk (deg/√hr): 0.125
Gyro Scale Factor (ppm): 150
Gyro Range (±deg/s): 1000
Accelerometer Bias (mg): 1
Accelerometer Scale Factor (ppm): 300
Accelerometer Range (±g): 50
Honeywell's high production volume of HG1700 IMUs enables excellent tactical grade performance for an economical price with short delivery times. The UIMU-HG is available as a complete assembly including the IMU and environmentally sealed enclosure. For customers who already have the HG1700 IMU, the enclosure can be purchased separately and the IMU easily integrated inside.
Enhance System AccuracyTake advantage of NovAtel CORRECT™ with RTK as well as support for satellite based augmentation systems such as SBAS to improve real time performance and accuracy. For the most demanding applications, our Inertial Explorer® post-processing software from our Waypoint® Products Group can be used to post-process SPAN HG data to provide the highest level of accuracy with the system.